220v Single Phase To 3 Phase Vfd For Air Compressor 0.75KW-3KW

Key Features

Single-phase to three-phase output: It is able to convert 220V single-phase power into three-phase power, which can be used for areas where there are only single-phase powers, to enable three-phase motors to function normally as well.

Speed control function: It can control the motor speed and help you to adjust the equipment speed as needed.

Energy saving: By controlling the motor speed, unnecessary power waste is avoided, saving electricity and cost.

Safety protection: Overload, overvoltage, undervoltage and other multi-protection functions are embedded inside to ensure safe operation of the equipment.

Intelligent control: Various control modes are supported to meet various application needs, simple and easy to use.

Product standard specifications

Table1 main technical specifications
Input	Rated voltage， frequency	3P   AC380V;50/60Hz 2P   AC220V;50/60Hz
	Voltage Range	3P AC360V～450V 2P AC190V～250V
output	Voltage	0～460V 0～260V
	Frequency	Low Frequency ：0～300Hz    High frequency ：0～3000Hz
	Overload Capacity	G Type:110%    150% 1min 200% 4s
		P Type:105%    120% 1min 150% 1s
Mode of control		V/F control 、High Level V/F control 、V/F Separation control 、No PG current vector control
Control characteristics	Frequency resolution	Analog Setting	Max output frequency 0.1%
		Digital Setting	0.01Hz
	Frequency accuracy	Analog input	Within the max output frequency 0.2%
		Digital input	Within the setting output frequency 0.01%
		V/F Curve
	V/F Control	Moment Improvement	Manually set ：Rated output 0.0～30.0%        Auto Improvement：According output current and motor parameters to auto improve moment.
		Automatic flow limiting and voltage limiting	Whether in the process of acceleration, deceleration or stable operation, the stator current and voltage of the motor  can  be  automatically  detected,  and  it  can  be suppressed to the allowed range according to a unique algorithm to  minimize the  possibility  of system failure jumping.
	Inductive vector control	voltage frequency characteristics	Automatically adjust the output voltage-frequency ratio according   to   the    motor    parameters    and    unique algorithms.
		Torque characteristics	Starting torque:3.0 Hz 150% rated torque (VF control)150% rated torque at 1.0 Hz (Advanced VF Control)150% rated torque at 0.5 Hz (no PG current vectorcontrol)Constant operating speed accuracy :≤0 2% ratedsynchronous speedVelocity fuctuation :s+0.5% rated synchronous speedTorque response :≤20 ms (no PG current vectorcontrol)
		Self-determination of motor parameters	Without any restrictions, automatic parameter detection can be completed under the static and dynamic motor to obtain the best control effect.
		Current and voltage suppression	The whole process of current closed-loop control andcomplete avoidance of current impact has a perfectover-current over-voltage suppression function
	Under voltage suppression in	Especially for users with low grid voltage and frequent grid voltage fuctuations, even if it is below the allowed voltage range, the system

	operation		can  maintain  the  maximum  possible  running  time  based  on  unique algorithms and residual energy allocation strategies.
Typical  function	Multi-Speed runningPID controlRS485		16-stage  programmable   multi-  speed  control  and   multiple  running modes are optional. Pendulum frequency operation: preset frequency, center frequency adjustable, state memory and recovery after poweroutageBuilt-in   PID   controller   (preset  frequency) .   Standard   configurationRS485 communication function, multiple communication protocols are optional, and there is linkage synchronization control function.
	Frequency setting		Analog input	DC Voltage 0～10V,DC Current 0～20mA
			Digital input	Operation panel setting, RS485 interface setting, UP/DW terminal control, and various combination settings with analog input can also be made.
	Output signal		Digital output	Two DO terminals open collector output and two programmable relay outputs (TA,TB,TC), up to 61 meaning choices
			Analog output	T~wo  analog  s~ignals  output,  the  output  range  ofachieve the set frequency, output frequency andother physical output
	Automatic SteadyPressure  Operation		According to the need, dynamic, static and non-stable can be selected to obtain the most stable operation effect
	Acceleration anddeceleration Time setting		0.1 s~3600.0 min continuous adjustable, S type , straight-line optional
	B r  e a k  i  n g	Energy Brake	The starting voltage, the return voltage and the energy consumption braking rate are continuously adjusted
		DC Brake	Stop DC brake s~tart frequency :0.00~[ F00.13]~upper limit frequency
		Magnetic   flux Brake	0～100    0 ：Be of no effect
	Low Noise Operation		Carrier    frequency    1.0KHz~ 16.0KHz    continuously    adjustable    to minimize motor noise
	Speed tracking speed   Restart function		It can realize the function of smooth restart and instant stop restart of motor in operation
	Counter		One internal counter to facilitate system integration
	Function		Frequency  setting  of  upper  and   lower  limits,  frequency   hopping operation,   reversal   operation   limit,   slip   frequency   compensation, RS485 communication, frequency increment, deceleration control, fault self-recovery operation, etc

Operation paneldisplay	Running State	Output frequency, output current, output voltage, motor  speed, set frequency, module temperature, PID setting, feedback, analog input and output, etc
	AlarmContent	The last six fault records, the last fault trip when the output frequency, set frequency, output current, output voltage, DC voltage, moduletemperature and other 6 operating parameters record
Defective function		Over-current, over-voltage, under-voltage, module failure, electronic thermal relay, overheating, short circuit, input and output phasedeficiency, abnormal tuning of motor parameters, internal memory failure, etc
ENVIRON MENT	Ambienttemperature	-10℃~+40℃
	Ambient humidityAmbientenvironment	5％～95％RH ，No condensationIndoor (no direct sunlight, no corrosion, flammable gas, no oil mist, dust,etc)
	Altitude	10% for each 1000 m increase
ORGANAZ ATION	levels ofprotection	IP20
	cooling-down method	Air cooling with fan control
Installation way		Wall mounted, cabinet type

Application areas

Fans and pumps: for regulating fan and pump speeds to save energy.

Production line equipment: for regulating machine speed on production lines to maximize production efficiency.

Air conditioners and elevators: for regulating operating speed of air conditioners and elevators to save energy and improve comfort.

Industrial equipment: for application with different mechanical equipment, e.g., conveyor belts and machine tools, for seamless speed control.

Choice of proper single-phase to three-phase VFD

Power requirement: select a proper inverter according to the load power to avoid overload operation.

Voltage matching: match the power supply voltage with the voltage of the selected inverter, e.g., 220V single-phase to three-phase.

Control mode: select different control modes according to actual requirements, e.g., digital control, analog control or network control.

Protection function: select an inverter with perfect protection function to ensure the equipment can still operate stably under severe working conditions.

Why select a ZHENGXI 220V single-phase to three-phase VFD

Improve efficiency: accurate speed regulation can make your equipment run more efficiently, saving resources and time.

Extend equipment life: By reducing the load on the motor and the equipment failure rate, your equipment can be used longer.

Energy saving and protection of the environment: The inverter helps you save energy, save electricity and meet environmental protection requirements.

More reliable control: It can control the speed of equipment accurately, so the operation is more efficient and stable.

Conclusion

220V single-phase to three-phase VFD not only controls the speed of motors but also saves energy and makes equipment more efficient. It is suitable for different industrial and domestic equipment to assist in achieving automation control and energy-saving goals. The selection of an inverter will improve production efficiency and extend the life of equipment.