Best vehicle battery 12v 100ah 120ah 160ah 240ah

Product Analysis

1.Anderson interface: supports charging of chargers and solar panels with the same interface within 30A current.

2. Positive connector: red positive connector.

3. Negative connector: black negative connector.

4. Cigarette lighter interface: can be connected to 12V appliances with a power of 120W.

5. Screen switch: control the battery’s voltmeter display.

6. USB interface: charge some USB-powered appliances such as cell phones.

7. Aviation interface: support charging with chargers within 10A current.

Technical Parameters

Parameters	100AH	120AH	160AH	240AH	280AH
Battery Brand	EVE Energy
Battery Type	Lithium iron phosphate
Battery Voltage	12.8V	12.8V	12.8V	12.8V	12.8V
Protection board overcurrent	120A	250A	250A	250A	300A
Output Interface	Terminal block*1, Anderson connector*1, Air connector*2, Cigarette lighter connector*2, USB*2
Charging Method	Utility charging, solar charging, cigarette lighter charging, generator charging, etc.
Weight	12.6KG	14.1KG	15.25KG	24.4KG	29.85kg
Size	180*340*195	215*360*185	215*360*185	260*485*185	260*485*185
Battery life	>2000 times
Operating Temperature	`-10℃-40℃
Electricity	1.3	1.6	1.9	3	3.6
Load power	1500	1500	1500	3000	3000

Battery protection function:

Function	Overshoot protection	Over-discharge low voltage protection	Short-circuit overcurrent protection	Over Temperature Protection
Lithium battery voltage protection parameters	14.6V	10V (below 11V protection)	100-160HA(120A) 240-280HA(250A)	75℃

Product Features

Overshoot protection: cut off the battery charging after charging beyond the protection voltage, the battery can work normally discharging.

Over-discharge low voltage protection: when the battery voltage is too low, the system will automatically cut off the battery output and make the battery shut down without voltage output. At this time, remove the load and re-switch the battery voltmeter, or charge the battery, can restore the voltage.

Short-circuit over-current protection: the battery positive and negative short-circuit or excessive current cut off the battery output, the battery automatically shut down no voltage output. At this time, remove the battery load to re-switch the battery voltmeter battery voltage can be restored.

Note: If the positive and negative poles are short-circuited or the current is too high, it is easy to damage the battery protection circuit, and the battery protection circuit cannot be restored after it is damaged, it can only be replaced!

Charging method: (This product all adopt the same port charging design)

1, utility charging

The included utility charger (5-10A) is used for charging. The charging time after battery depletion can be calculated by the following formula: battery capacity ÷ charger current = charging time. During the charging process, the indicator light of the charger will light up red; when charging is complete or the charger is not connected, the indicator light will turn blue. (Note: If the charger voltage exceeds the battery protection voltage, the battery may enter the protection state, at this time, it is normal for the battery to show a lower voltage after unplugging the charger.) The charger with current within 10A can be directly connected to the battery charging hole for charging; the charger with current more than 10A needs to be connected to the battery positive and negative terminals for charging.

2、Solar charging

Solar charging must go through the solar controller to charge the battery, the output voltage of the controller must be consistent with the battery charging voltage, not greater than the charging voltage of the lithium battery, otherwise it will cause damage to the lithium battery or danger!

3、Car charging

Car charging, first of all, to determine the car generator voltage, 12V can directly charge 12V battery, 24V can directly charge 24V battery. Battery and car main battery parallel charging, you need to add isolators between the battery and. If you want to charge a 24V battery in a 12V car, you need to install a charging system, please contact our customer service to get the information!

Battery use.

1, electrical appliances if the voltage is equal to the battery, you can use this battery directly.

2, if the appliances are 220V voltage appliances, need to be connected to the inverter after inverter can be used.

3, the total power of the appliances used can not be greater than the maximum power listed in the previous table.

4, the series and parallel use of batteries: lithium batteries can be used in parallel, when connected in parallel, the capacity is added, the voltage remains unchanged, after the parallel connection of the batteries connected in parallel is equivalent to a battery, can be charged and discharged at the same time. Lithium batteries can also be used in series, when connected in series, the capacity is unchanged, the voltage is added, after the series can only be discharged together, can not be charged together!