KSG series mining explosion-proof dry-type transformer is suitable for the explosion hazardous place of methane gas and coal dust under coal mine. In the AC 50Hz/voltage to 660V power supply line for coal electric drilling, lighting, signaling and other equipment to provide 1140V660V, 380V, 220V, 127V36V and other power supply.
♦ The case of KSG type mine explosion-proof transformer is made of welded steel plate, the case can withstand the air pressure test of 8 atmospheres, and the contact surface between the cover and the edge of the case meets the requirements of coal insulation.
♦ box cover is made of steel plate, there are two cable out of the set, out of the set placed inside the rubber gasket map, the cable through the rubber gasket, screwed out of the set, with the help of rubber gaskets to ensure the sealing of the cable pressure to ensure that the user’s choice of cable diameter, must be with the rubber gaskets with the rubber gaskets with close to be sure to make sure that the cable can be pressed to the complete sealing in order to ensure the isolation of performance; 3 box shell outside the welded drag frame.
♦ box shell outside the welded towing frame, for use in the horizontal position of the towing, in transportation or storage can be stored upright to save space.
♦ There is a grounding bolt inside the case: there is also a grounding screw on the case bracket, which should be properly grounded; 5 KSG series three-phase mining case has a grounding screw on the case bracket.
♦ KSG series three-phase mining hiccup coal transformer is widely used in various mines, underground, oil fields, metallurgical tunnels, railroads, gas stations, breweries, ships, and so on.
♦ before purchasing, first calculate the total power of the equipment you use, and choose enough power transformer to ensure that the start of the instantaneous current is too large will not burn the transformer “Recommended transformer power for the load power more than 3 times!
Note: The company can provide capacity: 2.5KVA, 4.0KV, 5KVA, 6KVA, 8KVA, 10KVA, 15KVA, 20KYA, 25KVA, 30KVA, 40KVA, 50KVA, 60KVA, 80KVA, 100KA and so on.
Inlet voltage can be: 1140V, 660V, 380V, 400V, 220V, 230V,
Outlet voltage can be: 660V, 400V, 380V, 2207, 230V, 127V, 36V, 24V.
| Model: KSG▢ ▢ | ||||
| K | S | G | ▢ | ▢ |
| Mining Transformer | Three-phase | Dry | Rated capacity | Rated Voltage |
What does a transformer A transformer is an electrical device that changes the voltage and current level of alternating current through the principle of electromagnetic induction. Can
How does a buck boost transformer work A step-up transformer increases the voltage by adding more turns to the secondary coil, while a buck transformer
Table of Contents What is a step up transformer A step-up transformer (also called a step‑up voltage converter ) steps up a lower AC input
Dry-type transformers and oil-immersed transformers are the two main types of power transformers, and although they both have a circuit system consisting of an iron core and windings,
Are you looking for reliable suppliers and quality products? Fill out the form and send it to us — we’ll get back to you within 24 hours!We’re not around but we still want to hear from you! Leave us a note
