How to choose the right AVR for your refrigerator? A practical buying guide!

Voltage instability is a problem faced by many families, especially in areas with unstable power supply. As one of the core appliances in the home that runs for a long time, the refrigerator is very sensitive to voltage fluctuations. Long-term unstable voltage may cause compressor damage, reduced refrigeration performance, and even shorten the life of the refrigerator.

So, how to ensure that your refrigerator can still operate safely when the voltage fluctuates? The answer is voltage stabilizer (AVR)! But there are many models on the market. How to choose the best voltage stabilizer for fridge?

As a voltage stabilizer supplier & manufacturer ZHENGXI that has served in the international market for many years, we are well aware of the differences in power environments in different countries and regions, and are committed to providing customers with reliable and efficient voltage stabilization solutions. Here is a quick guide on how to buy and use AVR to power your refrigerator.

Do Refrigerators Need Voltage Stabilizer?

The answer is: In most cases, refrigerators do need AVRs. But the specific situation depends on the type of refrigerator, power environment and budget.

If you are unsure about your power environment, it is a safer choice to purchase an AVR as an additional protection.

Servo motor type VS relay type AVR: Which one should I choose?

There are two main types of AVRs on the market, each with its own advantages and disadvantages:

1. Servo motor type AVR

✅ Mechanically adjust the voltage to achieve more stable and accurate voltage control (such as keeping it at 220V±3%).

✅ Suitable for high-end refrigerators and inverter refrigerators with higher voltage requirements.

❌ The price is high, and the mechanical structure may result in a slow response speed.

2. Relay type AVR

✅ The voltage is adjusted through electronic circuits, which is low cost and commonly used in household appliances.

✅ Suitable for ordinary refrigerators and can basically meet the voltage regulation needs.

❌ The adjustment accuracy is not as good as the servo motor type, and the adaptability to large fluctuations is slightly worse.

Conclusion: If the budget is sufficient and you want to get a more stable voltage control, you can choose the servo motor type. If it is only used in general households and the budget is limited, the relay type AVR can also provide sufficient protection.

How to choose the AVR capacity suitable for the refrigerator?

The refrigerator is an inductive load (an electrical appliance with a compressor) and will have a large power demand at the moment of startup. Therefore, the power of the AVR cannot only look at the rated power of the refrigerator, but at least 3 times the margin should be reserved to ensure that the voltage regulator can withstand the power surge at startup.

Calculation method:

AVR rated power = total power of the refrigerator × 3

For example:

· If the rated power of the refrigerator is 150W, the minimum AVR needs to be 450W, and it is recommended to buy a model of 500W or above.

· If the rated power of the refrigerator is 400W, the minimum AVR needs to be 1200W, and it is recommended to buy a model of 1500W or above.

If the refrigerator is a variable frequency model, it is recommended to choose a larger power fully automatic voltage regulator to ensure voltage stability during variable frequency startup.

Features worth paying attention to when purchasing an AVR

When purchasing an AVR, in addition to power and type, pay attention to the following key features to ensure better protection:

1. Surge protection

Prevents damage to the refrigerator caused by instantaneous high voltage during thunderstorms and sudden power outages. A high-quality AVR will automatically cut off the power when encountering a strong surge to protect the appliance.

2. Circuit breakers and replaceable fuses

Circuit breaker: Automatically disconnects the power supply in the event of an overload or short circuit to prevent damage to the equipment.

·Replaceable fuse: The fuse can be blown in the event of a severe surge to prevent damage to the refrigerator, and can be replaced.

3. Delayed start function

After the power is restored, the refrigerator should not be started immediately, otherwise the compressor may be damaged due to frequent starts and stops. The delayed start function can restore power 3-5 minutes after the power is cut off to allow the voltage to stabilize first.

4. Wide voltage input range

The voltage fluctuation range varies in different regions. It is recommended to choose an AVR that supports 80V-260V or wider range to adapt to various power supply situations.

5. Built-in transformer (for imported refrigerators)

If your refrigerator is an imported product, such as the 110V version of the US refrigerator, the AVR needs to have a transformer function to convert the 220V voltage to 110V to ensure compatibility. It is recommended to purchase the ZHENGXI WBT series step down voltage stabilizer.

Conclusion: Is it worth buying a refrigerator AVR?

In areas with unstable electricity, AVR is an important protection device for refrigerators. It can effectively prevent voltage fluctuations from damaging the compressor and extend the service life of the refrigerator. If your refrigerator is expensive, the power grid is unstable, or you want to use the refrigerator more safely, then it is worth choosing a suitable automatic voltage stabilizer.

When purchasing, please make sure:

✅ The power of the AVR is more than 3 times that of the refrigerator.

✅ Choose the right AVR type (servo motor type vs. relay type).

✅ Pay attention to additional protection functions such as surge protection, delayed start, fuse protection, etc.

If you are still not sure which AVR to choose, please consult our professional team, and we will recommend the most suitable voltage stabilizer according to your needs!

Related Products