Wide applicability: it is suitable for input voltage of 90-260V AC and can be customized with output voltage of 220V to meet the power needs of different regions and environments.
High efficiency and energy saving: efficiency reaches ≥90%, providing stable voltage while reducing energy consumption and operating costs.
Fast response: with a response time of ≤ 1 second, it can quickly adjust the voltage change to protect the safety of household appliances.
Multiple protection functions: built-in protection mechanisms such as over-voltage, under-voltage, short-circuit, overheating, phase failure, etc. ensure the safe operation of the equipment in the complex grid environment.
Servo motor control: adopting servo motor technology, the voltage stabilization accuracy reaches ±3% (adjustable), improving the stability of output voltage.
Adaptable to a variety of environments: the working temperature range is -10℃+40℃, and the storage temperature is -15℃+45℃, which is able to operate reliably under a variety of climatic conditions.
Humanized design: gray and white exterior design is simple and generous, suitable for various home styles. The digital display can clearly show the input and output voltage status, which is convenient for users to monitor in real time.
Technical specifications
Product model:
TND5-5KVA
Capacity:
5KVA
Input voltage:
150-250V
Output voltage:
220v
Work accuracy:
±3%
Rated current:
22.7A
Frequency:
50/60Hz
Applicable load:
Any load
Waveform distortion:
No additional waveform distortion
Product size:
Width 33 * Depth 25 * Height 27 cm
Product weight:
13.1kg
Packaging size:
Width 43 * Depth 33 * Height35 cm
Packaging weight:
14.4kg
Response speed:
≤ 1.5S (when there is no external voltage change greater than 10%)
Electrical strength:
Power frequency sine voltage of 1500V for 1 minute without breakdown or flashover phenomenon
Protection level:
IP20
Dissipate heat:
Self cooling/air-cooled
Protection function
Undervoltage:
When the output voltage is lower than 10% of the rated voltage, cut off the output power supply after a delay of 3-5 seconds;
Overvoltage:
When the output voltage exceeds 10% of the rated voltage, cut off the output power supply after a delay of 3-5 seconds;
Short circuit:
When the load device is short circuited, cut off the input power supply;
OVERCURRENT:
5 times the rated current for about 1 second
Conditions of Use
Installation:
Indoor
Altitude:
Altitude not exceeding 1500m
Environment:
-15℃~40℃
The installation site is free from gases, vapors, chemical deposits, dust, dirt, and other explosive and corrosive media that seriously affect the insulation of the voltage stabilizer;
There is no obvious vibration or turbulence in the installation site;
No obvious vibration or turbulence at the installation site;No significant vibration or turbulence at the installation site; Average relative humidity: When the ambient air temperature is +40 °C, the relative humidity of the air does not exceed 50%, when the temperature is lower,There can be higher relative humidity, the average maximum relative humidity in the wettest month is 90%, the average maximum relative humidity in the month is 90%.Low temperature is +25 ℃, taking into account the temperature change will produce condensation on the surface of the product;.
Do voltage AC stabilizers cost electricity? AC voltage stabilizers consume a small amount of electricity during operation because they are essentially a transformer controlled by
Power quality is closely related to factors such as supply frequency, amplitude and waveform distortion. Although power plants can control the frequency and amplitude of
Voltage stabilizers are widely used in modern household and industrial applications as they effectively protect electronic devices from voltage fluctuations. However, sometimes you may notice
Are you looking for reliable suppliers and quality products? Fill out the form and send it to us — we’ll get back to you within 24 hours!We’re not around but we still want to hear from you! Leave us a note